Posts: 0
Threads: 0
Joined: Dec 2004
20th October 2005, 08:33 PM
How the feck does one get a decent section in sand? Quickly? Clear nail varnish? Oh yeah, shillet in Plymouth-plenty lacerations.
Posts: 0
Threads: 0
Joined: Mar 2005
20th October 2005, 11:10 PM
There is some nice chalk gravel in east yorks. drains well, clearly defined features (mostly!) and easy to clean back.
Boulder clay, however, is the work of the devil }
dinos
Posts: 0
Threads: 0
Joined: Aug 2004
21st October 2005, 12:13 AM
Quote:quote:Originally posted by troll
How the feck does one get a decent section in sand? Quickly? Clear nail varnish? Oh yeah, shillet in Plymouth-plenty lacerations.
Try the sand in an iron foundary casting pit - soaked in whale fat and eminantly sculturable.
Posts: 0
Threads: 0
Joined: Dec 2004
21st October 2005, 12:40 AM
Posts: 0
Threads: 0
Joined: Apr 2005
21st October 2005, 09:08 AM
Quote:quote:Originally posted by mercenary
Got to disagree about chalk though. Doesn't clean up very well (It's as bad as gravel) And the black on white thing is a myth.
I have worked on chalk sites where the fills were dark, and the chalk cleaned up fairly easily so it is not wholly a myth.
Cheers,
Eggbasket
Gentleman Adventurer and Antiquarian
Manners maketh the man
Posts: 0
Threads: 0
Joined: Apr 2005
21st October 2005, 09:34 AM
I never liked gravel. I only seemed to work on gravel sites that were below the water table. Spent more time bucketting features out than digging them. I did an evaluation on a sand site that had areas well below the water table once too. The trench sides collapsed once it was over half a metre deep and the site looked a right mess.
Posts: 0
Threads: 0
Joined: May 2005
21st October 2005, 03:13 PM
Brick earth/ loess is the worst. It's either too wet or too dry. Faint features disappear and you have to clean sections/surfaces with a razor sharp plasterers leaf to see anything. When it's wet it's a skating rink. when its dry it's concrete.
Little Tim
Posts: 0
Threads: 0
Joined: May 2005
21st October 2005, 09:30 PM
Quote:quote:I have worked on chalk sites where the fills were dark, and the chalk cleaned up fairly easily so it is not wholly a myth.
Yeah OK, but it's not always like that.
Up in the godforsaken Wolds perchance? I hate chalk and always have, except where its making up medieval rubble foundations in cities.[:p]
Posts: 0
Threads: 0
Joined: Sep 2005
22nd October 2005, 11:28 AM
Marine silts found in cambridgeshire/lincolnshire fens are about the nicest to work... Even on the coldest day they are a dream to trowel/hoe. Only negative is that you are in the fens, no cover and freezing your #!$?@&% off. Oh and trying to avoid the yocals - talk about deliverance....